Accessories

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Each SICURO Ti cage is hand-made in the USA at our Indianapolis, IN headquarters using custom manufacturing processes and a state-of-the-art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets that allow fore/aft adjustability on the bike. The second-generation Ti Bottle Cage has a base-plate change to add more flexibility to the positioning on the frame, allowing usage for smaller frames. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high-tech as it gets. - Seamless 3-2.5 titanium tubing - Extended adjustment mounting: up to 21mm fore/aft - Weight: 30 grams - SILCA Shield Warranty included covering your cage for 25 years! - Please note: bolts are not included

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below

TL-EW300 Di2 Cable Tool

The Serfas PH-1 Bicycle Phone Holder fits mobile devices with screens 4.7 to 5.5-inches in size. It's made of soft stretchy silicone that won't scratch your device. The injection molded Nylon mount attaches easily to any size bicycle handlebars with a secure strap and single-nut adjustment system. The mount can rotate 360 degrees and locks at every 90-degree rotation for vertical or horizontal screen viewing. - Accommodates Single Mobile Device With 4.7 to 5.5 inch Screen (e.g. iPhone 8, iPhone 8 Plus, and other comparably sized devices) - Easy-To-Use Handlebar Mounting System - Silicone Holder Can Be Removed From Mount With Quick Release Tab - Size: 136mm x 46mm x 19.5mm - Materials: Silicone (Holder) / Nylon (Mount) - Weight: 51.8g

Serfas' Combo Cable Lock offers convenient protection. The 12mm-diameter cable reaches over 6-feet and self coils for easy storage. A 4-digit customizable combination lock, surrounded by molded rubber, ensures your bike stays put. And, a vinyl coating protects your bike's finish so it looks just as good when you return to ride it.

Serfas has the basics covered with the Combo Kit. It comes with their Micro Blast CO2 inflator, 2 16-gram threaded cartridges, a 6-piece mini-tool, and a set of tire levers, as well as a seat bag to carry it all.

The Serfas E-Lume Series light line was developed to be the best on the market at the very best value. These headlights will meet and exceed their expected lumen output while offering you all the features you've come to enjoy from Serfas lighting. Please welcome the new line of E-Lume Series lights, and be prepared to turn night into day. FEATURES - Compact Lightweight Design - Super Bright (1100 Lumens) Output - Last Mode Memory - Water Resistant Rating: IPX6 - New 3 Level Battery Life Indicator - Max Charge Rate of 2A - Charges from Dead to Fully Charge in 2.5 hours (Using 2A Rated Charger) - Illuminated Side Ports Optimize Side Visibility SPECS - Solid Modes: Overdrive (1100 Lumens): 1.5 hrs, High (700 Lumens): 2.5 hrs, Medium (400 Lumens): 4.5 hrs, Low (200 Lumens): 9.5 hrs - Flash Modes: Daytime Flash (1100): 30 hrs, Low Flash (200 Lumens): 40 hrs - Weight: 240 Grams with Bracket - Battery: LG® 2-Cell Li-Ion, 2200mAh

Air Force Tier Two floor pump - Ergonomic Handle - 2.5" Analog Pressure Gauge (PSI/BAR) - Simple Valve Smart Head (Presta/Schrader) - All Metal Barrel and Base - Integrated Hose Keeper - 28 1/2" Pump Height

The Serfas Handlebar Bag is a convenient bar storage solution for those all day rides around town. Free up your pants pockets and stow items in the external mesh pocket or just dump everyday items (water bottle, phone, wallet, keys, etc.) into the main cinch pocket. It's built of durable materials and construction, secures to bike using a universal-fit strap mounting system, and has a drain hole on the bottom. - Bottom fork strap is removable (recommended for bikes w/ suspension front fork) - Bottom side frame strap is removable (recommended for bikes w/ rigid front fork) - Can be installed on left or right side of stem - Universal-Fit Hook & Loop Mounting Straps - Size: 3.5" Diameter / 6.5" Height - Capacity: 62.5 Cubic Inches

Ride smart and more safely with Serfas Bar End Mirrors to help increase awareness and visibility of your surroundings as you ride. - Unbreakable Stainless Steel Lens - Base: Eco-Friendly High Impact Nylon Fiber - Universal Design For Left & Right - Fits Handlebars With 16mm-22mm Diameter Bar Ends - Lens: 68mm Diameter

With rugged looks, impressive light output, and smart features, the completely redesigned Serfas True Series MTB headlight will illuminate your path. The Serfas True 1000 MTB features 1000 lumens of crystal-clear bright nighttime illumination to make out every turn of the trail and 400 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. GoPro, helmet, and handlebar brackets included for multiple tool-free mounting options. - Last Mode Memory (In solid mode) - Convenient magnetic battery removal - IPX6 water resistance rating - 2A fast charging, removable battery: 1-Cell Li-Ion, 3200 mAh - Weight: 125g w/ bracket Solid Mode: - High 1000 Lumens – 2 hrs - Medium 500 Lumens – 4.25 hrs - Low 250 Lumens – 8.75 hrs Flash Mode: - High 400 Lumens – 35 hrs - Low 150 Lumens – 50 hrs

With clean, sleek looks impressive light output, and smart features, the completely redesigned Serfas True Series Road headlights will illuminate your path. The Serfas True 1000 Road features 1000 lumens of crystal-clear bright night time illumination to make out every potential hazard and turn of the road and 400 lumens in Flash mode to make sure all eyes are on you. Even more, a wrap-around amber LED illuminated side marker projects bright ambient light for added side visibility to traffic and pedestrians. A smart extra large power button with LED backlit battery level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises out on the road. GoPro, helmet, and handlebar brackets included for multiple tool-free mounting options. - Last Mode Memory (In Solid Mode) - Easy To Remove Li-Ion Battery - IPX6 Water Resistance Rating - Weight : 125g w/ Bracket - 1-Cell Li-Ion, 3200 mAh, 2A fast charging battery Solid Mode: - High 1000 Lumens – 1.75 hrs - Medium 500 Lumens – 2.75 hrs - Low 250 Lumens – 7.25 hrs Flash Mode: - High 400 Lumens – 26 hrs - Low 150 Lumens – 38 hrs

Rugged looks with impressive light output and smart features, our all-new completely redesigned Serfas True Series MTB headlights will illuminate your path. The Serfas True 600 MTB features 500 lumens of crystal clear bright nighttime illumination to make out every turn of the trail and 600 lumens in Flash mode to make sure all eyes are on you. A smart grippy extra-large power button with LED-backlit battery-level indicator ensures surefire operation and convenient battery monitoring so there are no unwelcome surprises on the trail. Go-Pro, Helmet, and Bar Bracket Included. - 600 Lumen Output - Extra-Large Grippy Power Button - Backlit LED Battery Level Indicator - USB-C Charging Port w/1A Fast Charging - Last Mode Memory (In Solid Mode) - Go-Pro and Bar Bracket Included - Removable Li-Ion Battery - Convenient Magnetic Battery Removal - No-Tools-Required Installation - IPX6 Water Resistance Rating - Weight: 128 Grams w/Bracket - Battery: 1-Cell Li-Ion, 2600 mAh - Charge Time: 3 hrs (Using 1A USB Wall Charger) Solid Mode: - High 600 Lumens—2.5 hrs - Medium 250 Lumens—4.5 hrs - Low 130 Lumens—10 hrs Flash Mode: - Daytime Flash 600 Lumens—40 hrs - Low 80 Lumens—50 hrs

E-Lume Series Headlight - Daytime Flash Mode - Up To 80 Hrs Runtime - Extruded Aluminum Body - Integrated USB Rechargeable Li-Ion Battery - Backlit Button Indicates Charge Status and Low Battery - Handlebar Bracket - Size: 103.7mm L x 31mm W x 22.6mm H (4.1" L x 1.22" W x 0.90" H) - Weight: 162 Grams w/Bracket - Battery: 1-Cell Li-Ion, 2500 mAh - Charge Time: 4 hrs To Full At 700mA Using USB Wall Charger Solid Mode: - Overdrive 605 Lumens—1.75 hrs - High 400 Lumens—2.75 hrs - Medium 200 Lumens—4 hrs - Low 100 Lumens—8 hrs Flash Mode: - Daytime 605 Lumens—80 hrs - Low 100 Lumens—25 hrs

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Connect your PC to CycleOps VirtualTraining.

Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

- For installing DUB BSA bottom brackets - Compatible with a 3/8-inch drive torque wrench so you can torque to spec

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.