Parts

- Aheadset preload adjusting bolt

Doubles represent the ultimate in toe strap comfort and performance. You won't believe how much more secure and comfortable they are than traditional singles until you've tried them yourself. Suddenly toe clips will make perfect sense, and you'll be riding with newfound confidence. - Leather with steel hardware - Intended for use with double-strap toe clips (sold separately) - 114 grams per pair - 420mm length

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Box One Single-Speed Chromoly Cogs are CNC-machined from long-wearing CNC-machined chrome-molybdenum. It's designed to fit Shimano™ compatible cassette hubs and has a 5mm wide inner base, giving a more solid interface with the cassette body. FEATURES - Chromoly Steel Offers Extra Long Service Life - 5mm Wide Inner Base to Give a More Solid Interface with Freehub Body

The Box Four cassette adapts our Prime 9 philosophy of durability, simplicity, and reliability at a great price point. All cogs are stamped from steel, given our durable black coating and then the larger cogs are pinned to each other with spacers for easy installation.

- Alloy top cap with hollow bolt to allow for brake cable pass-through - ED black durable finish - Size: 1-1/8"

- 4130 chromoly axle pegs with 3 position anti-rotation set screw - Designed for use with 14mm or 3/8" axles (with adapter) - 4130 chromoly offers a durable, long lasting peg with a smooth grind - 3 set screw positions extend the life the of the peg - Axle: 14mm / 3/8" - Diameter: 35mm - Material: Chromoly - Sold in pairs

Designed to conform to the center channel and bead locking rim bed, Boyd tubeless tape creates an air-tight seal between the tire and rim bed. - Not as stiff as a lot of the other options, which makes installation a breeze!

The square bottom on the rubber, plus the rubber extending down the valve helps create the best airtight sealing system. Set up is a breeze and works much better than other valves on the market. - 44mm valve for 28mm carbon, Altamont, Altamont, CCC, and MTB wheels - 60mm valve for 44mm carbon and 36mm depths (36 Road Disc, Pinnacle, and Jocassee) - 80mm valve for 55 Road Disc and 60mm carbon - 110mm valve for 90mm carbon and 90 Road Disc - Weights for the valve (with nut for tightening) is: 44mm—5g, 55mm—5g, 60mm—6g, 80mm—6g, 110mm—8g

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

The CULT x Vans tire features Vans' classic waffle pattern. - Grippy in all situations - High-pressure sidewalls

- 2-ply rubber shield fits between tire and tube to prevent flats - Pair

Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm

Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals. - Kit includes 2 bearings and 2 seals

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into the head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with straight 1-1/8-inch steerer tubes - Bearing Type: Cartridge - Color: Black - Crown Race: 30 - Lower Stack Height: 4 mm - S.H.I.S Lower: ZS44

This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS42/28.6/H9/x • Top Type: IS- Integrated • Top Head Tube Inside Dia.: 42.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 T Aluminum • Weight: 41.81g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly. This version uses a ZeroStack top cup and an external cup on the bottom.

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

Always needed. Quality tested and a great value, the 0.9mm thick butyl rubber innertube strikes the perfect balance between weight and durability. Where it thrives: In the garage, on the bike What it's built for: Durability, Fixing Highlights: - Schrader valve (American valve) with a removable valve core - 0.9mm wall thickness - Each tube passes a 24 hour air hold test prior to packaging

Add a little comfort and style to your ride with Cannondale's Synapse Bar Tape. It features a soft and durable suede finish with a gel backing for your riding enjoyment.

Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security

More comfort, more control. Advanced three-part construction is used to create a supple, durable tape with excellent vibration damping properties and a tacky all-weather finish. Where it thrives: The open road, up and down hills What it's built for: Comfort, control Highlights: - Lightweight EVA foam with a QuellGel silicone gel-layer provides an effective barrier against road-buzz for extra comfort - Thin polyurethane upper and knurled pattern provide grip in all weather / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 3mm, length: 200cm, weight: 112g

More comfort, more control. Quality silicone and an engineered foaming process, produces a great feel with unrivaled all-weather grip that can be washed and re-wrapped. Where it thrives: Any road it goes on, out in the elements What it's built for: Grip, durability Highlights: - Silicone and a hexagonal dimpled pattern provide the perfect balance of shock absorption and grip feel - Hardwearing and washable construction results in a long-lasting fresh look / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 165g

Next level spin. The forged one-piece design of the SL SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - X-Sync thick/thin tooth profiles for secure chain management - Eye-catching and unique design

The EVO386 standard is designed for oversized spindles. CeramicSpeed's kit for Shimano allows you to install Shimano or FSA cranks with 24mm spindles. The cups come with CeramicSpeed Bearings installed. Both CeramicSpeed Standard and Coated Bearings are available. Both utilize super smooth CeramicSpeed Balls and hardened-steel races. The latter has an additional metallic coating on the races to further smooth and harden the steel, further increasing life and lowering drag. The design of overlapping cups extending through the shell for EVO386 reduce the likelihood of creaking and increase the reliability of the system. The CeramicSpeed Standard Bearings feature an average drag reduction of 75% compared to stock bottom brackets. That translates into frictional drag of 0.3-0.4 watts per set, which is the result of great design, hardened-steel races, and ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Coated Bearings are a step up as they reduce drag by 50% compared to our Standard Bearings and an improvement in bearing life by 60%. All Round Grease comes standard in the bearings, but can be replaced for lower drag TT and Track Grease or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers - 10ml syringe of All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction. Compatible with: - Frame: BB30 - Opening diameter: 42mm - Shell width: 68mm - Bottom Bracket Tool for installation: BBT-79 In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The EVO386 for SRAM DUB Road comes in two versions. The first version uses our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: EVO386 - Opening diameter: 46mm - Shell width: 86.5mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 2 x 3mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Chris King has been making their own sealed bearings for 34 years, and never has there been a component that benefited more from their quality than the press-fit bottom bracket. The Chris King PressFit 30 Ceramic Bottom Bracket is specifically designed for frames that utilize pressed in bearing cups and is available in the full assortment of colors that only King can do. King makes their own ceramic bearings in-house and that level of quality control shines through in all of their products. This bottom bracket works seamlessly with King's precision injector tool (sold separately), so that flushing new grease into your bottom bracket is a quick and easy operation.

Boost Centerlock front hubs are designed as precision mountain tools. Featuring a one-piece axle to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra-low drag. - Wide flange placement - Fits 110x15mm Boost spacing - Easily serviceable with a T10 Torx and pick or pen knife - Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty - Hub Drilling: 28 - Hub/Brake Compatibility: Center-Lock Disc - Color: Black - Spoke Interface: J-Bend - Front Axle: 15mm Thru x 110mm

Boost Centerlock rear hubs are designed as precision mountain tools. Featuring one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and a threaded driveshell seal ring. - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Easily serviceable with a T10 Torx and pick or pen knife - Specifically designed for "BOOST" 148mm x 12mm axle standard - Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty - Hub Drilling: 32 - Skewer Included: No - Hub/Brake Compatibility: Center-Lock Disc

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

The Ultra Sport II is a road tire built to Continental's exacting standards, providing you with the optimal blend of low weight, puncture resistance, and long life. It sports a strong, supple 180 thread-per-inch, 3-ply casing and is at home in all situations, from miles of training to amateur racing to all-day centuries.

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

Continental's Traffic is the quintessential tire for daily use in the city and country. The center row ensures a comfortable ride on the street, while the knobs on the shoulders offer traction for exploring gravel roads and tame trails. Its solid construction and robust side wall make it an optimal companion when heading out into the excitement of big city streets.

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

The Double Fighter with a fresh new design and in a multitude of sizes. With a robust rubber sidewall, it fears neither the city nor the countryside. It rolls along the asphalt effortlessly and in silence. Its shoulder lugs allow it to stay on the right track, whether on park paths or gravel roads. Ideal for making knobbly off-road tyres into a swift city racer.

- Premium mobility for design enthusiasts. - Urban profile packed with the latest technology. - The perfect symbiosis between light-rolling and puncture protection reflected in this specialized tire designed for the City Jungle. - Faster? Not a problem with approval for E-Bikes up to 50km/h! PureGrip Compound Based on activated silica compounds, this technology was originally intended as a performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self-explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. While providing great grip, it is also long-lasting and highly durable—both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). SafetyPro The new SafetyPro Breaker designed from nylon textile. Cross-woven textile fiber netting that is simultaneously robust and flexible. Maximum puncture protection with minimal added weight. The risk of punctures resulting from glass or sharp stones is substantially reduced. E50—Suitable for E-Bikes For our E-Bike tires, we relied on over 100 years of experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high-quality structure, puncture protection is high and the rolling resistance is low, offering protection from premature wear brought about by the additional driving force.

The Trail King ShieldWall tire hits the mark with its superb grip and unexpected low rolling resistance for long distance riding over a variety of terrain. Making use of the innovative BlackChili compound, the Trail King is a master of the demands and challenges of all-mountain riding. Thanks to its comfortable and voluminous casing, this tire shines on enduro and all-mountain bikes with greater than 140mm of suspension. It’s Tubeless Easy and designed to inflate the first time using a standard floor pump.

Developed for the essential basic training at home. Particularly smooth running. The durable cold-running compound stops heat build up. - Suitable for training on rollers/home trainers only.

Continental's Gatorskin combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a light tire that rolls and corners with the best of them while providing flat protection second to none. - Weight: 290/310/360/365/390 grams (23c/25c/28c/32c/27 x 1 1/4) - PolyX puncture protection - DuraSkin sidewall protection

Continental's Gatorskin is a super long-wearing and reliable tire that's fast and great handling, too. It features a supple 180-thread-per-inch casing, a bead-to-bead layer of DuraSkin, and a Kevlar-reinforced top layer. The result is a lightweight tire that rolls and corners with the best of them while providing flat protection and durability second to none.